• 首页 首页 icon
  • 工具库 工具库 icon
    • IP查询 IP查询 icon
  • 内容库 内容库 icon
    • 快讯库 快讯库 icon
    • 精品库 精品库 icon
    • 问答库 问答库 icon
  • 更多 更多 icon
    • 服务条款 服务条款 icon

linux查看看网卡

武飞扬头像
PHP中文网
帮助40

linux怎么查看网卡?

linux查看网卡信息的几种方法(命令)

这两天由于测试需求需需要查看服务器上有几个网卡以及每个网卡信息等,因此收集一些查看这些信息的方法。

一、首先是最简单明了的两个命令, ifconfig和lspci。

1.ifconfig: 最常用的配置和查看网络接口信息的命令,服务器上执行此命令会得到类下文的内容,一下内容可看到多个设备和设备状态、信息。

[oracle@mori ~]$ ifconfig
      eth0      Link encap:Ethernet  HWaddr 00:0C:29:A4:5A:BF  
          inet addr:192.168.1.160  Bcast:192.168.1.255  Mask:255.255.255.0
          inet6 addr: fe80::20c:29ff:fea4:5abf/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:1650 errors:0 dropped:0 overruns:0 frame:0
          TX packets:112 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:134000 (130.8 KiB)  TX bytes:12228 (11.9 KiB)
 
     eth1      Link encap:Ethernet  HWaddr 00:0C:29:A4:5A:C9  
          inet addr:192.168.1.161  Bcast:192.168.1.255  Mask:255.255.255.0
          inet6 addr: fe80::20c:29ff:fea4:5ac9/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:1618 errors:0 dropped:0 overruns:0 frame:0
          TX packets:88 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:125909 (122.9 KiB)  TX bytes:9320 (9.1 KiB)
 
     lo        Link encap:Local Loopback  
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:182 errors:0 dropped:0 overruns:0 frame:0
          TX packets:182 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:10340 (10.0 KiB)  TX bytes:10340 (10.0 KiB)

2.lspci |grep -i 'eth' 或 lspci | grep -i net命令:可列出每个pci总线上的设备,通过grep过滤后可得到网卡设备列表,下文可看到我pci总线上的网络设备有俩,是两个intel的网卡:

  [oracle@mori ~]$ lspci |grep -i 'eth'
  02:01.0 Ethernet controller: Intel Corporation 82545EM Gigabit Ethernet Controller (Copper) (rev 01)
  02:06.0 Ethernet controller: Intel Corporation 82545EM Gigabit Ethernet Controller (Copper) (rev 01)
 
  [oracle@mori ~]$ lspci | grep -i net
  02:01.0 Ethernet controller: Intel Corporation 82545EM Gigabit Ethernet Controller (Copper) (rev 01)
  02:06.0 Ethernet controller: Intel Corporation 82545EM Gigabit Ethernet Controller (Copper) (rev 01)

3.iwconfig :用于查看无线网络,如果你设备上有无线网卡此时可用此命令来查看,我的设备上并没有无线网卡设备,因此会会得到如下信息。

  [oracle@mori ~]$ iwconfig
  lo        no wireless extensions.
  eth0      no wireless extensions.
  pan0      no wireless extensions.
  eth1      no wireless extensions.

二、除以上几个命令外有个神秘而强大的工具较 ethtool

1.ethtool 命令主要用于查询配置网卡参数。

2.用法:ethtool ethN //其中 N 是对应网卡的编号,如eth0、eth1等等

3.ethtool的功能较多,这里不一个一个地赘述,如有需求和查看其说明页 man ethtool,这里单独拿出来讲的一个功能,这个功能适用于如下场景:你的 服务器有多个网卡并且已经配置好运行当中,你却没记得eth0、eth1、eth2.....分别对应的是哪个物理的网卡,此时可以使用如下命令:

  [root@mori oracle]# ethtool -p eth0

此时就会看到 eth0 对应的物理口一个灯在不停的闪烁,对了。这就是我们在系统看到的那个叫eth0的网卡了,就是这么简单。

这篇好文章是转载于:学新通技术网

  • 版权申明: 本站部分内容来自互联网,仅供学习及演示用,请勿用于商业和其他非法用途。如果侵犯了您的权益请与我们联系,请提供相关证据及您的身份证明,我们将在收到邮件后48小时内删除。
  • 本站站名: 学新通技术网
  • 本文地址: /boutique/detail/tanfhbbi
系列文章
更多 icon
同类精品
更多 icon
继续加载